[English|Japanese]

One-day Symposium on
High Temperature Materials 2000

At the National Research Institute for Metals, Tsukuba
March 2 (Thursday), 2000

Photos

(C) 2000 High Temperature Materials 21(C) 2000 High Temperature Materials 21
(C) 2000 High Temperature Materials 21(C) 2000 High Temperature Materials 21

Proceedings

Programme

10:00

Opening remarks

10:05-10:45

1. Trends of High Temperature Materials Development in Japan
Dr. Hiroshi Harada, National Research Institute for Metals, Japan.

10:45-11:25

2. Development and Application of Cast Superalloys during the Past 40 Years in BIAM
Professor Yunrong Zheng, Beijing Institute of Aeronautical Materials, China.

11:25-12:05

3. High Temperature Materials for Gas Turbines: a Rolls Royce Perspective
Dr. Robert W.Broomfield, Rolls Royce, U.K.

12:05-13:15 <<Lunch>>

12:40-13:10 <<Laboratory tour in NRIM, for those who wish>>

13:15-16:30 (High Temperature Materials 21 Project Reports)

13:15-13:40

4. Materials Design for Superalloys
Dr. Hideyuki Murakami, National Research Institute for Metals, Japan

13:40-14:00

5. High Temperature Microstructure Analysis in Superalloys
Dr. Makoto Osawa, National Research Institute for Metals, Japan

14:00-14:25

6. Microstructure and Creep Behaviour of a New Single Crystal Superalloy Developed at NRIM
Dr. Maurizio Maldini, National Research Institute for Metals, Japan

14:25-14:50

7. Development of Superalloys for Industrial Gas Turbine and Jet Engine Applications
Dr. Toshihiro Yamagata, National Research Institute for Metals, Japan

14:50-15:05 <<Break>>

15:05-15:30

8. Platinum Group Metals Base Refractory Superalloys as Ultra-High Temperature Materials
Dr. Yoko Yamabe-Mitarai, National Research Institute for Metals, Japan

15:30-15:55

9. New Ceramics based on Silicon-Nitride
Dr. Naoto Hirosaki, National Institute for Research in Inorganic Materials, Japan

16:55-16:30

10. Development of a Virtual Gas Turbine for Materials Evaluation
Dr. Toyoaki Yoshida, National Aerospace Laboratory, Japan

16:30-17:10

11. Business Directions and Materials Challenges for the Aircraft Engine Industry
Professor James C. Williams, The Ohio State University, USA.

17:10-17:25

General Discussion

17:25-17:30

Closing remarks

17:30-19:00

Reception at NRIM

don@nrim.go.jp

Back to Parent Page
Last modified: Thu Oct 18 19:31:36 JST 2001